Mon–Sun: 6 AM–11 PM(208) 679-8041

Wall insulation in Burley ID - warmer rooms without tearing out your walls

Drafty rooms and a power bill that climbs each winter? We fill your existing walls through small holes so the house holds heat.

A high-ceilinged room has white spray foam coating the roof and walls between exposed wooden framing.

Can you add insulation to walls that are already finished?

Wall insulation in Burley, ID usually means dense-packing the closed spaces inside the walls you already have, blowing loose fill in tight through small holes from inside or outside, so drafty rooms hold heat without tearing out drywall or siding.

Most calls for this start with a cold bedroom, outside walls that feel chilly to the hand, or a power bill that keeps climbing every winter. The price mostly comes down to how much wall we're filling, whether we work from inside or outside, what your siding is and any repairs that have to come first, and those same repairs, plus checking whether a permit is needed, set the schedule. Your estimate spells out that prep, so you see it before you decide. We often pair the walls with air sealing services, closing the gaps around outlets, windows and trim before insulating, because insulation does a lot less with air moving through it.

Why Burley homeowners call us for wall insulation

You'll deal with me from the first look to the last wall, and I'll tell you what has to happen first, even if that means the job waits.

  • I look at your walls

    I'm the one who comes out, checks the walls and writes the estimate, so you talk to the person running the job.

  • In business since 2021

    I started this business in Burley in 2021, and careful prep work is what we've been known for since.

  • Learned on a working crew

    I came from years of maintenance work and learned insulation on another contractor's crew before going out on my own.

  • Fully licensed and insured

    We carry both on every job, and you're welcome to check our registration before you sign anything.

  • Your satisfaction, guaranteed

    That's our promise on every wall we fill, so call (208) 679-8041 or send the form when you're ready to talk.

Ways to add wall insulation to your house

Which way we go depends on your siding, the shape your walls are in, whether you're remodeling, and which side you'd rather have patched, inside or out.

  • Filling from outside

    We loosen or take off siding where needed, and vinyl, aluminum and steel usually come loose with a siding tool, then we drill behind it and put it back.

  • Filling from inside

    We drill small holes through the drywall or plaster, cover the floor below and keep the dust contained, then patch the holes when we're done.

  • Spray foam where walls are open

    Foam seals air as it insulates, but it usually costs the most of any way to fill an existing wall, so I mostly suggest it when walls are already open.

Talk to us about wall insulation

Call (208) 679-8041 or send the form, and I'll come look at your walls before anyone drills a hole.

How Total Burley Spray Foam Insulation handles wall insulation

I look for water stains, soft spots and cracks in the plaster or drywall before I quote a wall, because packing insulation in tight pushes hard on weak spots and can make the damage worse. If there's a moisture problem, it gets found and fixed first, and I'd rather tell you a wall isn't ready than bury the problem.

Once a wall is ready, our crew fills each cavity tight, patches or puts back what we opened and cleans up before we leave. If the cold in a room is really coming up through the floor, basement insulation may do more for you than the walls, and I'll tell you that.

Wall insulation questions we hear

Can insulation go into my walls without opening them up?

Yes, in most houses we fill closed walls through small holes, so the drywall and siding stay where they are. Ask any contractor which side they'd drill from, because it changes what gets patched afterward.

How much does blown-in wall insulation cost in Burley?

Installed blown-in wall insulation usually costs about $3.90 to $4.60 per square foot across the US, so treat that as the national going rate, not our price. Your house lands where its wall area, siding and prep put it, and the estimate spells out any prep it needs.

How do I check an insulation contractor's registration in Idaho?

Use the Idaho Contractors Board's registration search, and if something doesn't line up, the board takes questions at (208) 334-3233 or BCRE-Licensing@dopl.idaho.gov. If you're doing the work yourself on your own home, Idaho law doesn't require you to register.

How long does wall insulation take, and do we have to leave the house?

It depends on how much wall we're filling, which side we work from and what prep comes first, and we'll go over the schedule with you before we start. With blown-in fill you can usually stay home while we keep you out of the room we're in, but foam has a re-entry time, the wait before you can come back in, and we'll tell you that ahead of time.

What causes moisture inside walls in winter?

In cold weather, warm, damp air from inside the house can slip into the walls and turn to water on cold surfaces like the back of the sheathing, the boards under your siding. That's why we close the gaps before we fill a wall, and why wet spots get fixed first.

Should I add wall insulation when I replace my siding?

Usually yes, because re-siding is the best time to add continuous insulation, a solid layer over the outside of the wall, while the old siding is already off. If you're planning new siding, call us before the siding crew is booked so the insulation fits into the same project.

What happens when you call about wall insulation in Burley?

We plan the job around your walls and your house, so nothing gets drilled or covered until the prep is sorted and you've said yes.

  1. Call or send the form

    Call (208) 679-8041 or send the form, and mention your siding type and any stains or soft spots you've noticed on the walls.

  2. I look at the walls

    I come out and check the walls, the siding and the outlets, and I tell you whether we'd work from inside or outside.

  3. Your estimate

    You get an estimate that spells out any prep the walls need, like a moisture repair or cracked plaster, so you see what comes first.

  4. Permits and the work

    Once you say yes, we check on permits and schedule the job, and our crew fills and patches the walls with me running it.

Wall insulation in Burley and nearby

In Burley, the city's Chief Building Official tells you whether a wall insulation job needs a permit, so we check before we start and handle it if one's needed. We also fill walls in Rupert, Kimberly and the cities around them.

Get a wall insulation estimate in Burley

We pick up from 6 AM to 11 PM seven days a week, so call (208) 679-8041 or send the form whenever you have a minute.