Mon–Sun: 6 AM–11 PM(208) 679-8041

Vapor barrier installation in Burley ID - a crawl space floor that's fully covered

Bare dirt or torn plastic in your crawl space? We lay a ground cover matched to how your crawl space is built, vented or sealed.

A crawl space has reflective vapor barrier sheeting across the floor and insulated panels along the foundation walls.

Does your crawl space need a vapor barrier?

At Total Burley Spray Foam Insulation, vapor barrier installation in Burley means laying a plastic ground cover over the dirt floor of your crawl space, which helps cut down the moisture vapor and soil gases, like radon, that come up from the ground.

Most calls start with bare dirt under the house, plastic that's torn or bunched up, or floors that stay cold. What changes the job most is whether your crawl space is vented, with openings to the outside, or sealed, because a sealed one needs conditioned air on top of the cover, and that adds work and cost. The rest of the price comes down to how much floor there is, whether old plastic comes up or can be repaired, and how much has to be cleared out first, and the schedule mostly turns on that prep and on any permit. I'll spell all of it out in your estimate, and if the floors above stay cold, we can look at crawl space insulation at the same time.

Why Burley homeowners hire us for vapor barriers

We're known for crawl space work where the prep gets as much attention as the plastic, and I'd rather tell you a job isn't ready than cover something up.

  • The owner prices the job

    I look at your crawl space and write the estimate myself, so the person pricing it is the one who saw it.

  • In business since 2021

    I started this company in 2021 after years in maintenance and learning insulation on another contractor's crew.

  • Fully licensed and insured

    Idaho's licensing division covers anyone taking on a construction job over $2,000 in materials and labor, so ask any bidder about it.

  • Vented or sealed, settled first

    We work that out with you before we price anything, because it changes what the job involves.

  • A straight answer on old plastic

    If there's old plastic down there, we'll tell you whether it can be repaired instead of torn out.

Which vapor barrier job fits your crawl space

The right choice starts with how your crawl space is built, so I look at the vents and what's on the floor before we talk about plastic.

  • Cover for a vented crawl space

    The cover goes over the floor and the vents stay open. National guides disagree on whether the seams need sealing here, so ask which way each bid handles them.

  • Sealed and conditioned crawl space

    Here the cover's seams and openings get sealed, and code calls for the air down there to be conditioned like the house's air, which is also what keeps moisture problems away.

Ask about your vapor barrier

Call or send the form for an on-site estimate, and say whether the crawl space is vented or sealed if you know.

How Total Burley Spray Foam Insulation earns trust on vapor barriers

It starts with me in your crawl space with a flashlight, looking at the vents, the dirt, any old plastic and anything that's wet or shouldn't be there. I'd rather tell you to fix a leak or clear out the space first than lay plastic over a problem and call it done.

When you say yes, our crew lays the cover and finishes the seams and edges the way your estimate says, then cleans up. If the house above is still drafty, ask about attic air sealing or a wider retrofit insulation job, since cold air usually gets in more than one way.

Vapor barrier questions from Burley homeowners

What does a crawl space vapor barrier do?

It covers the dirt floor of your crawl space with plastic so less ground moisture vapor and soil gas, like radon, works its way up toward the house. It only does that well when it's laid well, which is why we put so much time into the prep.

How much does vapor barrier installation cost in Burley?

Across the US, putting a vapor barrier in a crawl space usually costs about $1,200 to $4,000 per job, and that's the national going rate, not our price. Your own number comes from the estimate, which spells out the cover and any prep work before you decide anything.

Can I install a crawl space vapor barrier myself?

Yes, Idaho law lets you do construction on your own residential property, whether or not you live there, without falling under the state's contractor rules. If your crawl space is going to be sealed, I'd think twice, because the air has to be conditioned and that's a lot more than laying plastic.

What should I look for in a crawl space vapor barrier bid?

Check that it covers the whole floor, since a federal energy guide calls for the cover to reach all of the ground or as close as is reasonably possible. Ask what thickness of plastic each bid uses too, because one trade magazine says thicker sheeting is better than the minimum it sets.

How long does a crawl space vapor barrier job take?

A plain cover in a vented crawl space is the quicker job, and a sealed one takes longer because the conditioned air has to be planned and set up too. Clearing stored stuff and debris out ahead of time keeps things moving, and I'll give you a realistic schedule once I've seen the space.

What is the best way to tell if my crawl space is vented or sealed?

Look for vents in the foundation walls around the outside of the house, because if they're open to the outside, you most likely have a vented crawl space. If you can't tell, I'll figure it out with you when I come look.

What happens when you call about a vapor barrier in Burley?

Every crawl space is a little different, so the plan comes from what I see down there and what you want from the space, not from a set package.

  1. Call or send the form

    Call (208) 679-8041 or send the form with your address, and we'll get back to you to set a time for me to come out.

  2. I look underneath

    I get down in the crawl space, check the vents, the floor and any old plastic, and figure out with you whether it stays vented or gets sealed.

  3. Your written estimate

    Your estimate spells out the cover, how the seams and edges get handled, and any prep work, like clearing debris or repairing old plastic.

  4. Permits, then the work

    Once you say yes, we check on permits and schedule the job, and our crew lays the cover with me running it.

Vapor barrier installation in Burley and nearby cities

Which building office covers your address isn't always clear, so before work starts we check with the City of Burley, Cassia County or Minidoka County and handle any permit. We're based in Burley and serve Rupert, Kimberly and nearby cities.

Get your vapor barrier estimate in Burley

Call (208) 679-8041 any day from 6 AM to 11 PM, or send the form, and tell us what you've found under the house.