Mon–Sun: 6 AM–11 PM(208) 679-8041

Spray foam insulation in Burley ID - a tighter, warmer house with fewer drafts

Drafty rooms, a hot upstairs or cold floors over the crawl space? We seal and insulate with the right foam for each spot.

A worker in protective gear sprays white foam insulation into a wood-framed wall cavity.

Is spray foam the right insulation for my Burley house?

Spray foam insulation is foam our crew sprays onto the attic, walls or crawl space of your Burley house, where it expands into the gaps, so it stops drafts while it insulates.

Most calls start with a drafty house, a hot upstairs or a room over the garage that never warms up, and foam is one way to fix that, though it isn't always the best one for attic insulation on its own. The price mostly turns on which foam each space needs, how much area we're covering, how much prep comes first, like pulling out old soaked insulation, and how easy the space is to get into. The schedule turns on that prep and on the time you'll spend out of the house while the foam goes on, and the estimate I write after looking at your house spells out the foam, the area and the prep work.

Why Burley homeowners pick us for spray foam

You can count on the work being done in the right order, so nothing gets foamed over that should've been fixed first, and on a straight answer about which foam fits.

  • The owner writes your estimate

    I come out to look at the job myself, and our crew does the work with me running it.

  • Foam matched to each space

    We talk through which foam fits each part of your house before anything else gets planned or priced.

  • Prep before the foam

    If old insulation is soaked or full of droppings, it comes out first so the foam isn't hiding a problem.

  • Fully licensed and insured

    Ask to see the paperwork when I'm out for the estimate, before you sign anything.

  • Working in Burley since 2021

    I started this business here five years ago, after learning the trade on another contractor's crew.

Which spray foam goes where in your house

We pick the foam by what each space has to do, whether that's stopping drafts, keeping moisture out or both, and by where the ductwork and wiring run.

  • Open-cell foam

    Open-cell foam is softer and lighter, and it expands to fill odd-shaped gaps, so it's a common choice for attic rooflines where stopping air leaks is the main job.

  • Closed-cell foam

    Closed-cell foam is dense and rigid and blocks moisture as well as air, so it's what we usually talk about for rim joists, crawl space walls and spots that see damp.

  • Foam on the gaps, loose fill on top

    Often the better answer is to seal the gaps with foam and top up the attic with blown-in insulation, loose fill blown through a hose. That usually comes out ahead on cost, unless your ductwork runs through the attic, and then full foam is worth it.

Talk to us about spray foam

Call (208) 679-8041 or send the form and tell us which spaces you want foamed, and I'll come take a look.

Why homeowners trust Total Burley Spray Foam Insulation

When I come out, I look at the whole space before we talk foam, because foam sprayed over a leak or wet insulation seals the problem in. If something has to be fixed first, like a roof leak or old insulation that needs insulation removal, I'll tell you the job isn't ready yet and put that prep in the estimate.

On the day, our crew masks off whatever shouldn't get foam, seals around can lights, pipes and the attic hatch, and sprays the edges and corners as carefully as the open runs. Before we leave, we clean up and walk you through what was done. Your satisfaction, guaranteed.

Spray foam questions we hear in Burley

How much does spray foam insulation cost in Burley, ID?

The price depends on your house, so I give you a figure after I've seen the spaces you want foamed. Closed-cell costs more than open-cell, and bigger areas, thicker coats, tight crawl spaces and prep like pulling out old insulation all add to it. Foam on the gaps with loose fill on top often costs less than foaming everything, and your estimate lists each part so you can see where the money goes.

How do I choose between open-cell and closed-cell spray foam for my walls?

Open-cell foam stops air well but lets water vapor through, while closed-cell foam at the usual thickness slows moisture, so a frame wall sprayed with closed-cell can't dry well to the outside. The choice comes down to how each wall is built and where moisture comes from, and I walk you through that before we settle on either one.

What is the best spray foam for a crawl space or basement?

Open-cell foam is a poor fit below ground in many cases, because it lets moisture pass, so closed-cell is usually the one we look at there. That's why we settle the foam type first on a crawl space or basement job, before thickness or anything else, and sometimes a crawl space vapor barrier belongs in the plan too.

How long do we have to stay out of the house after spray foam insulation?

Plan to be out while the foam is sprayed and for at least 24 hours after, which is what some makers recommend, though the wait can vary by product. The chemicals can cause irritation and, in people who aren't protected, long-term lung problems, so the family stays elsewhere and painters or electricians come on another day. I tell you which product we're using and what its maker asks for, and we set the schedule around that.

Does spray foam need to be covered after it's installed?

Sometimes it does, depending on the foam's maker, which may call for a thermal or ignition barrier, a protective layer placed over the foam. I check what the product we're using needs in your space and put any covering in the estimate, so it isn't a surprise later.

What paperwork should a contractor give me before a home job in Idaho?

Idaho law requires a general contractor to give you a disclosure statement before a contract over $2,000 to alter or repair your home. Ask for it before you sign, along with a written estimate that names the foam, the areas and the prep work.

What happens when you call about spray foam in Burley?

We plan the job around your household, from which foam goes where to the time you'll spend away while the foam goes on.

  1. Call or send the form

    Call (208) 679-8041 or send the form and tell us which rooms feel drafty, hot or cold and which spaces you're thinking about foaming.

  2. I look at the space

    I come out and go through the attic, walls or crawl space, checking for leaks, wet insulation and open gaps before we talk about foam.

  3. Your written estimate

    You get a written estimate that names the foam for each space and spells out any prep work that has to happen first.

  4. Permits, date and the work

    Once you say yes, we check on permits, set the date around your time away, and our crew sprays the foam with me running it.

Spray foam insulation in Burley and nearby cities

We're based in Burley and do the same spray foam work in Rupert, Kimberly and the cities around them, mostly drafty houses with crawl spaces and rooms over the garage. The City of Burley asks owners to talk with its Chief Building Official before starting any construction, and Cassia County issues building permits too, so we check which office covers your address and whether your job needs a permit, and if it does, we take care of it and set up the inspections.

Get a spray foam estimate in Burley

Call (208) 679-8041 any day from 6 AM to 11 PM, or send the form, and we'll set up a time for me to come look.